Scotia New Logo

Come 2015, Scotia’s new logo will give ourselves a new status in showing how we aspire to be a
quality driven solution provider via constant improvements & innovating in our pursuit for excellence in serving all our clients within the oilfield industry.

Branding has always held a special part within Scotia’s book of business and we are proud to be
where we are over the past 4 years. Please see below our new Scotia’s logo to be launched on
01 January 2015 (soft launch starts in December 2014).

 

Scotia Inspection Consultants has successfully completed ISO 9001 Recertification and NATA Surveillance Audit for ISO/IEC 17020

Scotia Inspection Consultants Pty Ltd has successfully undergone the following stringent audits for November 2013:

ISO 9001:2008 re-certification audit last 27th and 28th of November 2013 conducted by Intertek Certification Limited. The scope was expanded to Oil and Gas Non Destructive Testing (NDT) and Inspection Services. The certificate can be found through this link Scotia Inspection Consultants ISO 9001 Certification.

IEC/ISO 17020:2012 Surveillance Audit conducted by National Association of Testing Authorities (NATA). Through this successful audit, Scotia maintains scope of accreditation under IEC/ISO 17020:2012 for Lifting and Lifted equipment inspection. Scope of accreditation can be found on this link: http://www.nata.asn.au/index.php/scopeinfo/?key=20740. Scotia is also fully accredited by NATA under IEC/ISO 17025 for Non Destructive Testing (NDT), the scope of which can be found on: http://www.nata.asn.au/index.php/scopeinfo/?key=20774.

Scotia Inspection Consultants successful NATA Surveillance Audit and Extension of NDT Scope

Scotia Inspection Consultant has successfully achieved extension of the following Non-Destructive Testing (NDT) scope in accordance with the requirements of AS/NZS ISO/IEC 17025:

  • 6.50 Ultrasonic examination of materials
    • 99 Product-specific ultrasonic technique capability, specified as follows
      Ultrasonic examination of tubular drill pipe in accordance with facility procedure number
      SIC-WI-033
  • 6.51 Ultrasonic thickness testing
    • 01 Material thickness – spot or grid measurements only
  • 6.61 Magnetic particle testing
    • 01 Magnetic flow method – AC magnetization
    • 03 Coil method
  • 6.71 Penetrant testing
    • 01 Water washable method
    • 02 Solvent removable method
  • 6.81 Electromagnetic examination of materials
    • 11 Surface flaw detection using high frequency eddy current on structural welds on lifting containers and baskets in accordance with facility procedure SIC-WI-36

Scotia is also accredited in accordance with the requirements of AS/NZS ISO/IEC 17020 (2000) as Type A Inspection Body:

  • 2.02 Lifting and lifted equipment
    • In-service inspection comprising structural and operational integrity (excluding associated electrics, electronics, hydraulics and/or pneumatics)
  • 01 Lifting devices
    • Code(s): In-house procedures covering relevant Australian Standards
      Lifting devices including lever hoists, serial hoists, chain blocks, sheave blocks, winches, forklift jibs, lifting beams and spreader beams
  • 02 Lifted equipment
    • Code(s): In-house procedures and similar industry specifications
      Lifted equipment and associated rigging including certified offshore containers and forklift man cages
  • 03 Rigging
    • Code(s): In-house procedures covering relevant Australian Standards
      Rigging including chain slings, synthetic flat webbing, synthetic round slings, wire rope slings
  • 04 Rigging Components
    • Code(s): In-house procedures covering relevant Australian Standards
      Rigging components such as rigging screws, turnbuckles, shackles, plate clamps, rings, oblong links, wire rope grips and other terminal devices and attachments
  • 06 Cranes components
    • Code(s): In-house procedures covering relevant Australian Standards
      Crane components limited to wire ropes, chains, webbing, sheaves, drums, hook blocks and other terminal fittings

With this NATA’s official and formal approval, Scotia can fully endorse reports for the approved scope above.

For further details, please refer NATA’s website http://www.nata.asn.au/index.php/facilitysearchresults/?match=exact&searchword=Scotia

Scotia Inspection Consultants & Halliburton Australia sign off on three year contract.

Scotia Inspection Consultants Pty Ltd, an ISO 9001 certified Testing, Inspection, Certification & Consultancy (TICC) company in Perth, Australia has signed off on 3 year contracted service agreement with Halliburton Australia Pty Ltd for the provision of Inspection Services at their new Jandakot facility commencing 14 January 2013. This new working business relationship commencing 2013 emphasis the market trust in Scotia Inspection Consultants as a quality driven independent 3rd party inspection service provider in Western Australia.

Scotia Inspection Consultants is proud to serve and to meet Halliburton Australia’s and all our VIP clients’ inspection requirements with our overall market experience and technical expertise for the long term supply of professional OCTG and Lifting/Lifted Equipment inspection services.

© All content is exclusive property of Scotia Inspection Consultants Pty Ltd.

|  back to top